Yearly Archives: 2016

New Bifolds

IMG_0268 (1)

This was an outdoor area at home but it was never used so I decided to put in bifold doors, a side window and fixed glass surrounding this space. We gained an extra room and created a new space away from the existing lounge with great views of the garden. A little chill out zone. The bifolds needed a channel  cut into the slab for them to track on. I’m using my demo saw with the water attachment to make two saw cuts 20 mm apart and 20 mm deep, then chip out the channel with a small electric jack hammer.

IMG_0250 (1)

 

Related: Interest Stories

Dining Table

One of the greatest tools I have is a Lucas Mill (Google it). It’s a portable mill which you build over the fallen log. We had a nice tree unfortunately come down on the property, a white stringy bark gum. It’s timber is not used that much ... [read more]

Japanese Tools and Workshop

I visited Japan a few years ago and dropped into a master carpenter’s workshop. What an incredible experience it was! The timber, the tools, the craftsmanship, it was all amazing. The handsaw in the photo was used to cut a 60mm slab from a l ... [read more]

DIY Flower Pot Holder

Do you want your kitchen window sill to look greener?

Then watch this how-to video to make the perfect shelf for your pots. This simple timber plant stand, for inside or outside, is just the thing for your herbs or flowers.

Check out the photos below to see how easy it is to create this great stand that frames your pots.

140729H+scot-1701

Step 1: Measure and mark

140729H+scot-1551

Use your measuring tape and pencil to mark out where your round holes will be drilled in your length of timber. Choose a piece of wood that will fit well on your windowsill. My piece of timber is long, so I’m going to cut it in half and use the excess to make the legs. Make sure you measure out the spaces in between your holes evenly.

Step 2: Cut your holes

140729H+scot-1560

I’ve used a holesaw drill bit, which will come in handy for future projects if you decide to invest in one. I’ve measured the pots and picked a holesaw that matches the size of the pots to give them a perfect fit within the shelf.

Step 3: Sanding

140729H+scot-1572

Sand your timber down, then cut the two leg pieces from the wood using the drop saw.

Step four: Screw in the legs

140729H+scot-1587

Next you need to screw the top onto the legs. Drill down through the top into the legs and insert three screws on each side. The timber I’ve used is hardwood, so when you go to drill the legs on, it’s going to be tougher for the screws to countersink on the surface. Use a bigger drill bit to put a countersink hole at the top so the screw sits flush.

Step five: Staining

140729H+scot-1600

Give the legs a bit of a sand down to smooth the surface and get rid of any sharp or rough edges. Then, wearing gloves, wipe on the all-weather stain, so your shelf looks great and copes well with being outside.

Final Step: DIY Flower Pot Holder

140729H+scot-1611

 

Related: Do it Yourself

DIY Art Boards

https://www.youtube.com/watch?v=Exh6v5Gr5hU These art boards are a great way to show off your kid’s art work and knowing how many masterpieces come home each week from school, its also an easy way to update the displays. Have a look at the ... [read more]

DIY Xmas Decoration

https://youtu.be/12p2w0fVU3o Creating Christmas decorations for the tree can be simple and fun. All you need is timber, a drill, paint and a rope. Watch this how-to video and check out the pictures below on how to create this little Christmas ... [read more]

Follow the build – Mudgee Part 12

TILING THE BATHROOMS

IMG_1641It’s always hard to choose tiles for the wet areas, so many choices at Beaumont’s but with the help of the girls there, I came up with some great ideas. I just hope Shayna, Neil and Darren don’t come over for a barbie. In the ensuite though, I did copy Brad and Dale’s winning bathroom from Fans v Favourites.

IMG_1648 IMG_1629 IMG_1643 IMG_1649

 

Related: Follow the Mudgee build

Follow the build – Mudgee Part 13

I did want a polished concrete floor throughout the house but had some hesitation about slab on ground in the bush. I know it’s done everywhere but I do like the under house ventilation a frame gives you. So I went with steel screw piers as we ... [read more]

Mudgee – Follow the Build Part 11

INTERNAL WALLS At long last, The Block has wrapped up for another year. The auction was outstanding, and I couldn't be happier with all the hard work our Blockheads put in. But now that’s done and dusted, it’s time for me to get back to work ... [read more]

DIY Xmas Decoration

Creating Christmas decorations for the tree can be simple and fun. All you need is timber, a drill, paint and a rope.

Watch this how-to video and check out the pictures below on how to create this little Christmas house. Using this simple idea you can design and create a variety of decorations at this festive time.

Begin with length of timber (7cm x 4cm) Plus timber scraps to use as stamps; pencil; ruler; circular saw; drill; paintbrush; red paint; black paint; rope

Step 1: Mark the centre point

150422H+scotty-4103

Place the timber on the table longways vertically. On the top edge, mark the centre point.

Step 2: The roof

150422H+scotty-4106

To create the roof line, rule a diagonal line about 45° from the centre point to the right, towards the outside edge. Repeat on left side. The lines don’t have to be perfectly even – it’s better if your house is a bit rough looking.

Step 3: Circular saw

150422H+scotty-4111

Use a circular saw to cut along the lines, creating the house shape. Now work out how big your house needs to be and mark the bottom line – about 7cm down from the roof line. Cut along that line with the saw.

Step 4: Drill a hole

150422H+scotty-4114

You need to be able to hang your decoration, so drill a hole right through, near the roof peak.

Step 5: Paint

150422H+scotty-4117

Paint the roof red.

Step 6: Windows and door

150422H+scotty-4129

Use timber scraps to stamp the window and door. My window is a 1cm square and my door is about 1cm x 2cm. Dip the end of the small stamp into black paint then press onto the house in the window positions. Repeat with the other stamp to make the door shape.

Step 7: Rope

150422H+scotty-4132

Thread rope through the hole. Tie a knot then trim excess length.

Final result: DIY Xmas Decoration

150422H+scotty-4459

 

Related: Do it Yourself

DIY Flower Pot Holder

https://www.youtube.com/watch?v=u8rgQEJNKzw Do you want your kitchen window sill to look greener? Then watch this how-to video to make the perfect shelf for your pots. This simple timber plant stand, for inside or outside, is just the thing for ... [read more]

DIY Deer Head

https://www.youtube.com/watch?v=mG8xV2PAkLw This is a chance to use your creative skills and have fun with designing your own deer head with antlers. It can have a modern or classical look or even a Christmas feel. Check out the DIY instruction ... [read more]

Pork Crackling Recipe

 

Screen Shot 2016-12-12 at 4.06.13 PM

There’s nothing quite like some nice crispy pork crackling. My whole family loves it and it’s the perfect centrepiece to any Christmas lunch or dinner. Follow the instructions below to find out how to cook up some ripper pork crackling like mine.

Step 1: Massage oil and salt into the skin like you love it.

Step 2: Have your BBQ on super hot.

Step 3: Cook with the lid down for 40mins.

Step 4: Turn heat down to normal cooking temperature, time will depend on size.

I do mine on a rotisserie that I have on my BBQ and it turns out a treat.

This is mine last Christmas.

Screen Shot 2016-12-12 at 3.52.45 PM

 

Japanese Tools and Workshop

IMG_0063 2

I visited Japan a few years ago and dropped into a master carpenter’s workshop. What an incredible experience it was! The timber, the tools, the craftsmanship, it was all amazing.

The handsaw in the photo was used to cut a 60mm slab from a large piece of timber, about 4mtrs long 500 x 500, all cut by hand. A chalk line was flicked on both sides of the timber and my old mate used this saw to hand cut the slab, always keeping to the lines on both sides and square and true. Amazing!

IMG_0057 2

This saw is a pull saw so the cutting is done on the pull stroke not the push. In the third photos you can see some of the many chisels that my Japanese carpentry mate has. Incredibly sharp and beautifully maintained, they treat their tools like gold.

IMG_0066 2

Let me know what some of your prized tools are on my Scotty Cam Facebook Page.

 

Related: Interest Stories

New Bifolds

This was an outdoor area at home but it was never used so I decided to put in bifold doors, a side window and fixed glass surrounding this space. We gained an extra room and created a new space away from the existing lounge with great views of ... [read more]

Recycled Water – It’s the way to go!

These days recycled water is the way to go. Why we got rid of rainwater tanks years ago is beyond me. I’m glad to see them coming back. We know that rainwater is a valuable source. Using rainwater not only helps to reduce your bills therefore s ... [read more]

DIY Deer Head

This is a chance to use your creative skills and have fun with designing your own deer head with antlers. It can have a modern or classical look or even a Christmas feel.

Check out the DIY instruction on the video and the pictures below to see how simple it is to create your own wall mounted Deer Head.

140729H+scot-1690

Step 1: Find the centre point

140729H+scot-1530

Step 2: Mark out the shield

140729H+scot-1532

Step 3: Cut out the shield

140729H+scot-1533

Step 4: Cut out the head

140729H+scot-1540

Step 5: Drill a hole for the head

140729H+scot-1545

Step 6: Attach the antlers

140729H+scot-1547

Final Result: DIY Deer head

140729H+scot-1550

 

Related: Do it Yourself

DIY Xmas Decoration

https://youtu.be/12p2w0fVU3o Creating Christmas decorations for the tree can be simple and fun. All you need is timber, a drill, paint and a rope. Watch this how-to video and check out the pictures below on how to create this little Christmas ... [read more]

DIY Toothbrush Holder

This DIY Toothbrush Holder is so easy to make - you can even get the kids involved. Check out this how-to video to create your very own DIY Toothbrush Holder or have a look at the photos below see how easy it is to make this DIY Toothbrush Hol ... [read more]

Pineapple Peeler – Now That is Genius!

sc_20161130_152326

This is a gadget that I absolutely love. I use it all the time and people always ask me about it. I got mine from a commercial kitchen shop in Crows Nest.

How it works is easy. Cut the top of your pineapple straight off, line it up about centre, just push it down and start turning – trying to keep it straight. Go all the way down to the bottom of the pineapple and pull the peeler out once you’re done. Once you’ve pulled the peeler out, take the handle off and slide the pineapple rings down and off the peeler. Now that is genius.

ON YA Scotty

ON YA
Scotty

Mudgee – Follow the Build Part 11

INTERNAL WALLS

IMG_1499

At long last, The Block has wrapped up for another year. The auction was outstanding, and I couldn’t be happier with all the hard work our Blockheads put in. But now that’s done and dusted, it’s time for me to get back to work on my own project.

Here’s the latest update on my project Follow the Build – Part 11.

IMG_1496

Now that we’re locked up, it’s time to plaster. One of the local boys came into Gyprock all the walls and ceilings and because I’ve got the screw piers down below, there’ll be no movement and therefore no cracking in the joints or cornices. It’s always great to see plaster on the walls because it means the joint is really starting to come together.

IMG_1497

IMG_1513

That’s all for now, folks. Keep following the build and let me know your thoughts on my Scotty Cam Facebook Page.

Won’t be long til the next update so stay tuned for part 12 coming very soon…

 

Related: Follow the Mudgee build

Follow the build – Mudgee Part 12

TILING THE BATHROOMS It’s always hard to choose tiles for the wet areas, so many choices at Beaumont’s but with the help of the girls there, I came up with some great ideas. I just hope Shayna, Neil and Darren don’t come over for a barbie. ... [read more]

Mudgee – Follow The Build Part 10

EXTERNAL WINDOWS AND DOORS It’s been a busy few weeks for me as The Block has gotten down to the business end of the competition. But my projects are coming along nicely. Here’s the latest update on my project Follow the Build – Part ... [read more]